烟台奥亚石材应用技术有限公司
・Stone repair adhesive
・Stone protection
・Stone cleaning
・tone polishing maintain
Your Site: Home > Product >D55 Stone Crack Adhesives
   
Product
 
 
D55 Stone Crack Adhesives

Auya D Reinforcing adhesives (D50 and D55 and D60) is a transparent liquid compound. It is used for repairing and remedying the cracks or sand pits of natural stone. It can strengthen and increase the intensity of the stone and reduce damage. It can be used to improve the surface of the stone and the overall quality of the stone.

CHARACTERISTICS

Permeability is good. It can enter into the tiny cracks and sand pits of the stone to glue and repair it.

High polymer material. High intensity. Weather ability is good.

Increases the intensity and luminosity of the stone. The color of the treated stone is more beautiful.

Finished results are fresh and natural

INSTRUCTIONS

Tools: Iron scraper or plastic scraper -- used to spread the reinforcing adhesives on the stone. Container -- used to mix two liquids of A and B. Wooden stick -- used to mix A and B. Balance -- used to measure A and B in order to get the correct proportion.

Keep the surface of the stone level. If the surface is uneven, you can grind it roughly, but do not polish the surface.

Clean the surface of the stone with water then keep it dry. Don't use the adhesives if the stone is warmed by sunlight.

Put the stones separately on several brackets.

Mix liquids of A and B evenly, according to the given proportion strictly, and use it up in the time specified.

Pour the mixed liquid on the stones surface, spread it with the scraper and make the surface appear drenched by the water. Because the liquid has extremely strong permeability, the imperfections that you see will need repeated treatments.

Spread the surplus liquids to another stone that need to be treated when the liquids do not permeate any more.

Seal the bottom of the stone in case liquid oozes out if the cracks and the sand pits permeate through the stone.

Do not move the stone before the adhesives is completely hardening.

The treated stone can be stacked with a PVC membrane.

Polish the treated stone after it is totally hardened. Be careful not to polish the adhesives away. It must be ground and polished when wet, otherwise the polishing will effect the gloss of the surface.

PRECAUTIONS

Put on protective gloves while working.

Mix the two liquids according to the given proportions.

Test the galley proof first before construction

Ask the consultive supplier if you are uncertain about something.

MIXING INSTRUCTIONS
About 50 grams / square meters.

Period: 2 years if keep it in a cool, dry place.

D50: Suitable for repairing and remedying very tiny cracks and sand pits of the granite.
D55: Suitable for repairing and remedying smaller cracks and sand pits of the granite. D60: Suitable for repairing and remedying larger crackles and holes of the granite and marble.

SERVICE TIME AND HARDENING TIME

Environmental Temperature

   10°C

20°C

Above 30°C

Sevricetime

 

D50

About 2hrs

About 50mins

About 30mins

D55

About 2hrs

About 45mins

About 30mins

D60

About 45mins

About 20mins

About 15mins

Hardening

time

 

D50

About 3 days

About 2 days

About 1 day

D55

About 2 days

About 20hrs

About 18hrs

D60

About 16hrs

About 6hrs

About 5hrs

D60: Suitable for repairing and remedying larger crackles and holes of the granite and marble.D60: Suitable for repairing and remedying larger crackles and holes of the granite and marble.D60: Suitable for repairing and remedying larger crackles and holes of the granite and marble.

   
Copyright @ YanTai Auya Stone Materials Maintenance Co., Ltd., all rights reserved